TESTO 300 LL NEXT LEVEL - Alarm limits; Sensor diagnosis; Error list; Device information

8 Using the product
48
4
Tap [OK].
8.2.6.12 Alarm limits
Alarm limits can be set for the CO Ambient measurement type. An audible
alarm signal is triggered when the alarm limit is reached.
1
Call up function: | Device Settings | Alarm limits

Alarm limits input screen is opened.
2
Tap directly on the value in the relevant input field.

Keypad appears.
3
Enter the value via the keypad.
4
Confirm each input with ✓.
5
Tap [OK].
8.2.7 Sensor diagnosis
Overview of the sensors fitted and their condition.
1
Call up function: | Sensor Diagnosis
8.2.8 Error list
Call up error reports.
1
Call up function: | Error list
8.2.9 Device information
Call up device information.
1
Call up function: | Device information
8.2.10 Server information
Information about the available server.
1
Call up function: | Server information