TESTO 300 LL NEXT LEVEL User Manual

10 Maintenance
97
10.11 Replace thermocouple
1
Release probe catch by pressing the key on the probe handle and
remove probe module.
2
Remove thermocouple plug-in head
from the socket using a screwdriver
and pull thermocouple out of the probe
shaft.
3
Insert new thermocouple into the probe shaft until the plug-in head
clicks into place.
4
Fit probe module onto the probe handle and click into place.

TESTO 300 LL NEXT LEVEL Specifications

General

Brand	TESTO
Model	300 LL NEXT LEVEL
Category	Measuring Instruments
Language	English