Testomat EVO TH CAL - Available Indicators for Testomat EVO TH CAL Devices

Service description
12
 Error history for 20 notifications
 Firmware update via SD card
 Built-in self-test with ongoing monitoring
 Optional wireless retrieval of data with special WLAN SD card
 Features for integration into process controllers:
– Fault signal output (neutral changeover contact) with Clear
input
– Current loop 0/4 - 20 mA for analog transfer of measurement
data
– Serial RS232 interface to transfer measurement data and no-
tifications/alarms
Available indicators for Testomat
®
EVO TH
CAL devices
Parameter/indicator type
Water hardness
TH 2005
TH 2025
TH 2100
TH 2250
Unit
°dH
(resolution)
0.05 - 0.50
(0.01)
0.25 - 2.50
(0.05)
1.0 - 10.0
(0.2)
2.5 - 25.0
(0.5)
°f
(resolution)
0.09 - 0.89
(0.02)
0.45 - 4.48
(0.1)
1.8 - 17.9
(0.4)
4.5 - 44.8
(1.0)
[ppm]
CaCO
3
(resolution)
0.89 - 8.93
(0.2)
4.5 - 44.8
(0.9)
18 - 179
(3.8)
45 - 448
(10)
mmol/l
(resolution)
0.01 - 0.09
(0.01)
0.04 - 0.45
(0.01)
0.18 - 1.79
(0.04)
0.45 - 4.48
(0.1)
Please be careful to ensure that Heyl indicators are used!
Using external indicators may result in considerable measurement
deviations or measurement errors. Damage caused by foreign parti-
cles in the area of the dosing pump, measuring chamber or valves is
also possible. This may invalidate the guarantee!
At Heyl, we always strive to ensure the consistently high quality of
our indicators. They are specially tailored to the requirements of our
measuring devices and guarantee flawless measurement results.
NOTE