Input basic programming data
53
Change password
In the menu
=>Basic program => Change Password
the password can be set. For this purpose, the existing four-digit
password code must be input, before the new code, which includes
four digits, can be input.
The default password on delivery is 0000.
Password protection
In the menu
=>Basic program => Password protection
the set password can be activated. For this purpose, the existing
four-digit password code must be input first.
Firmware update
Menu-driven firmware update
In the menu
=> Basic program => Firmware update
the operating software of the Testomat device is updated. For this
purpose, you need an SD card.
Implement the firmware update as follows:
Download the firmware update for the Testomat
®
EVO TH CAL
from the Heyl website and save it in the root directory of the SD
card to be inserted into the Testomat
®
EVO TH CAL
Insert the SD card into the Testomat
®
EVO TH CAL
Select in the menu
=> Basic program => Firmware update
Confirm the selection with "OK"
Select the filename of the update. If only one file exists, only con-
firmation is required.
Confirm the selection with "OK"
The Testomat restarts and implements the update. In this mode, alt-
hough no text is output, the status is indicated via the LEDs of the SD
card as well as those on the control card.
During the firmware update, the red LED lights up next to the SD
card plug-in slot (which indicates that the so-called bootloader
is active).
To Next Page
Loading...