Spare parts and accessories for Testomat® EVO TH CAL
77
Spare parts and accessories for
Testomat
®
EVO TH CAL
Controller / filter mounting, complete
Controller / filter mounting
Controller plug T2000, complete
Flow governor core complete
Locking pin 3x38 / 90 degrees
Filter sieve for inflow 19.5dx25
Angle male connector G 1/8"
Viewing window with seal, T2000
Viewing window holder, vertical and
weighted
Tensioning hook TL-17-201-52
Disk plug 5.3dx5 PE natural
Measuring chamber T2000 complete
Measuring chamber mounting
Measuring chamber mounting complete
ET
Male connector 3/8" -10, processed
Magnetic valve, 2/2 ways, Testomat®
EVO TH
Bottle connection/suction device
Screw cap with Insert T2000
Insert for screw cap with suction pipe
Motherboard complete 230V
Controller board complete
Display circuit board EVO complete
Nut for cable ducting M16 x 1,5
Blanking plug for cable ducting
Ribbon cable 10 pol. with ferrite
Cable harness 2V for T2000
Cable harness 2P for T2000
Lithium backup battery CR2032
Multi-range power supply board 100V –
240V
Spare parts required for 2 - 3 years of opera-
tion
Viewing window with seal, T2000
Filter sieve for inflow 19.5dx25