Functions of the control and display elements
24
Device settings and data input
Before you configure the required settings and inputs to facilitate
operation of the device, please read the following information.
Functions of the control and dis-
play elements
The operating modes and measurement values are shown on the
display of the Testomat
®
EVO TH. The input keys for the program-
ming (cursor block) and function keys are underneath the display.
Switching the Testomat
®
EVO TH CAL device
on/off
(1) External power switch
Use the external power switch to switch the device on or off
(2) Device fuse (internal)
These fuses protect the device or outputs against overload and
short circuit.
Descriptions of the fuses are found in Replacing fuses and under
Spare parts and accessories for the Testomat® EVO TH.
Switching on/off
Wait at least five seconds after switching off before switching back
on.
To Next Page
Loading...