Input basic programming data
38
Switching function duration
If the limit value LV1 or LV2 is exceeded, the output LV1 relay or LV2
switches. If the limit value LV1 or LV2 is not attained, the correspond-
ing relay is again deactivated.
Switching function impulse
If the LV1 or LV2 limit value is exceeded, the corresponding output
switches for the set time (t).
Regardless of the duration for which the limit value is exceeded, the
corresponding output remains always switched for the set time. A
renewed impulse is possible only once the reading falls under the
limit value!
To Next Page
Loading...
