Figure 2-10. Interfacing BIA demonstration board to EVM
• Under BIA Tab, Import the closed circuit configuration file using the IMPORT CLOSED ELECTRODE
CONFIG button as shown as shown in Figure 2-11. Wait for all the register settings to be loaded to the
AFE4500. Once completed, Import Completed status will come in the status bar below the GUI.
Figure 2-11. Loading closed electrode configuration
• Select the DATA that need to be available in the data to plot drop down as shown in Figure 2-12
EVM Software
www.ti.com
14 AFE4500 EVM User Guide SBAU370 – APRIL 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
To Next Page
Loading...
