Texas Instruments AM64 Series User Manual

BOOTMODE[9:7] - These pins provide optional settings and are used in conjunction with the primary boot
device selected. For more details, see the device-specific TRM.
Table 3-10. Primary Boot Media Configuration BOOTMODE[9:7]
SW3.2 SW3.1 SW2.8 Primary Boot Device
RSVD RSVD RSVD RSVD
RSVD Iclk Csel OSPI
RSVD Iclk Csel QSPI
RSVD Mode Csel SPI
RSVD RSVD RSVD RSVD
RSVD RSVD RSVD RSVD
Bus Reset Don't Care Addr I2C
RSVD RSVD RSVD UART
Port RSVD Fs/raw MMC / SD Card
RSVD RSVD RSVD eMMC
Core Volt Mode Lane Swap USB
RSVD RSVD RSVD GPMC NAND
RSVD RSVD RSVD GPMC NOR
RSVD RSVD RSVD PCIe
SFDP Read Cmd Mode xSPI
RSVD RSVD RSVD No-boot / Dev-boot
BOOTMODE[12:10] - Select the backup boot mode, that is, the peripheral/memory to boot from, if primary boot
device failed.
Table 3-11. Backup Boot Mode Selection BOOTMODE[12:10]
SW3.2 SW3.1 SW2.8 Backup Boot Device Selected
off off off None (No backup mode)
off off on USB
off on off RSVD
off on on UART
on off off RSVD
on off on MMC/SD
on on off SPI
on on on I2C
BOOTMODE[13] - These pins provide optional settings and are used in conjunction with the backup boot device
devices. For more details on bit details, see the device-specific TRM. When on, switches SW3.6 sets 1 and,
when off, sets 0.
Table 3-12. Backup Boot Media Configuration BOOTMODE[13]
SW3.6 Boot Device
RSVD None
Mode USB
RSVD RSVD
RSVD UART
RSVD RSVD
Port MMC/SD
RSVD SPI
RSVD I2C
BOOTMODE[14:15] - Reserved
www.ti.com
System Description
SPRUIX0C – FEBRUARY 2021 – REVISED JUNE 2021
Submit Document Feedback
AM64x/AM243x GP EVM User's Guide 21
Copyright © 2021 Texas Instruments Incorporated

Texas Instruments AM64 Series Specifications

General

Brand	Texas Instruments
Model	AM64 Series
Category	Computer Hardware
Language	English