Texas Instruments AM64 Series User Manual

1.1 EVM Revisions and Assembly Variants
The various AM64x/AM243x GP EVM PCB design revisions, and asssembly variants are listed in the table
below. Specific PCB revision is indicated in silkscreen on the PCB. Specific assembly variant is indicated with
additional sticker label.
Table 1-1. AM64x/AM243x GP EVM PCB design revisions, and asssembly variants
PCB Revison Assembly Variant Revision and Assembly Variant Description
PROC101E2 N/A (single variant produced) First prototype, early release revision of the AM64x/
AM243x GP EVM. Implements the Sitara
™
AM6442
MPU.
PROC101A 001 First production release of the AM64x/AM243x GP
EVM. Implements the Sitara
™
AM6442 MPU.
PROC101A 002 First production release of the AM64x/AM243x GP
EVM. Implements the Sitara
™
AM2434 MCU in the
ALV package.
Note
Throughout this document, the AM6442 and AM2434 devices are interchangable in diagrams and
other tables, other than explicitly defined exception. The AM2434 MCU in the ALV package and the
AM6442 MPU are footprint and pinout compatible and the PCB has been designed to accommodate
both.
2 Important Usage Notes
2.1 Power-On Usage Note
CAUTION
To avoid high inrush currents and prevent possible damage to the AM64x/AM243x GP EVM
components, the proper EVM power on and power off procedures are required. For more details,
see Section 3.3.
Introduction
www.ti.com
4 AM64x/AM243x GP EVM User's Guide SPRUIX0C – FEBRUARY 2021 – REVISED JUNE 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated

Texas Instruments AM64 Series Specifications

General

Brand	Texas Instruments
Model	AM64 Series
Category	Computer Hardware
Language	English