Communications
Introduction
The TMS320C28x contains features that allow several methods of communication and data
exchange between the C28x and other devices. Many of the most commonly used
communications techniques are presented in this module.
The intent of this module is not give to exhaustive design details of the communication
peripherals, but rather to provide an overview of the features and capabilities. Once these
features and capabilities are understood, additional information can be obtained from various
resources such as documentation, as needed. This module will cover the basic operation of the
communication peripherals, as well as some basic terms and how they work.
Learning Objectives
Learning Objectives
Serial Peripheral Interface (SPI)
Serial Communication Interface (SCI)
Multi-Channel Buffered Serial Port (McBSP)
Enhanced Controller Area Network (eCAN)
C28x - Communications 11 - 1
To Next Page
Loading...
Need help?
General
