Texas Instruments C28 Series Student Guide

Exercise 2a
Summary: Linker Command File
The linker command file (.cmd) contains the inputs — commands — for the linker. This
information is summarized below:
Linker Command File Summary
Linker Command File Summary


Memory Map Description
Memory Map Description


Name
Name


Location
Location


Size
Size


Sections Description
Sections Description


Directs software sections into named
Directs software sections into named
memory regions
memory regions


Allows per
Allows per
-
-
file discrimination
file discrimination


Allows separate load/run locations
Allows separate load/run locations
2 - 16 C28x - Programming Development Environment

Texas Instruments C28 Series Specifications

General

Brand	Texas Instruments
Model	C28 Series
Category	Computer Hardware
Language	English