www.ti.com
Introduction
3
SNLU223–August 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DS90UB954-Q1EVM Quick Start
Trademarks
All trademarks are the property of their respective owners.
1 Introduction
NOTE: The demo board is not optimized for EMI testing. The demo board was designed for easy
accessibility to device pins with tap points for monitoring or applying signals, additional pads
for termination, and multiple connector options.
Figure 1. DS90UB954-Q1EVM
2 Quick Start Guide
2.1 System Requirements
2.1.1 Included Components
The major components of the DS90UB954-Q1EVM are:
• DS90UB954-Q1
• On-board Power-over-Coax (POC) interface
• Two FAKRA coax connectors for digital video, power, control and diagnostics
• Samtec QSH type connector for CSI-2 interface
• On-board I
2
C programming interface
To Next Page
Loading...
