Texas Instruments TI-84 Plus Software Guide

TI-84 Plus Cabrië Jr. Application Page 55
Error Message Description
You cannot use or CURRCAJU or
CURRCAJ2 as a file name. They are
reserved AppVar names.
This happens, under tight Flash RAM
conditions, when you have been working
with an archived figure and make it
significantly larger. In such a case, there
may not be enough memory to save the
figure in Flash RAM, so it is saved as a
regular AppVar in RAM.
The batteries in your calculator are low and
the file cannot be saved into Flash RAM.
You can save the file without archiving it,
then change the batteries and archive the
file later. See the TI-84 Plus guidebook
for
information about archiving and unarchiving
files.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-