Texas Instruments TMS320C6748 User Manual

15
14
13
13
13
13
13
13
13
12
12
11
10
10
9
A0 A1 B0 B1A30 A31 B30 B31 C0 C1 C2 C3 C31
AHCLKR/X (Falling Edge Polarity)
AHCLKR/X (Rising Edge Polarity)
AFSR/X (Bit Width, 0 Bit Delay)
AFSR/X (Bit Width, 1 Bit Delay)
AFSR/X (Bit Width, 2 Bit Delay)
AFSR/X (Slot Width, 0 Bit Delay)
AFSR/X (Slot Width, 1 Bit Delay)
AFSR/X (Slot Width, 2 Bit Delay)
AXR[n] (Data Out/Transmit)
ACLKR/X (CLKRP = CLKXP = 0)
(B)
ACLKR/X (CLKRP = CLKXP = 1)
(A)
151
TMS320C6748
www.ti.com SPRS590G –JUNE 2009–REVISED JANUARY 2017
Submit Documentation Feedback
Product Folder Links: TMS320C6748
Peripheral Information and Electrical SpecificationsCopyright © 2009–2017, Texas Instruments Incorporated
A. For CLKRP = CLKXP = 1, the McASP transmitter is configured for falling edge (to shift data out) and the McASP
receiver is configured for rising edge (to shift data in).
B. For CLKRP = CLKXP = 0, the McASP transmitter is configured for rising edge (to shift data out) and the McASP
receiver is configured for falling edge (to shift data in).
Figure 6-33. McASP Output Timings

Texas Instruments TMS320C6748 Specifications

General

Brand	Texas Instruments
Model	TMS320C6748
Category	Control Unit
Language	English

Summary

Device Overview

Features

Lists the key features of the TMS320C674x Fixed- and Floating-Point VLIW DSP.

Description

Functional Block Diagram

Device Comparison

Device Characteristics

Overview of C6748 hardware features, peripherals, on-chip memory, and package type.

Memory Map Summary

Pin Assignments

Pin Multiplexing Control

Terminal Functions

Device Reset, NMI and JTAG Terminal Functions

Details terminal functions for RESET, NMI, and JTAG signals.

External Memory Interface A (EMIFA) Terminal Functions

Details terminal functions for the External Memory Interface A.

DDR2/mDDR Controller Terminal Functions

Details terminal functions for the DDR2/mDDR Memory Controller.

Serial Peripheral Interface Modules (SPI) Terminal Functions

Details terminal functions for SPI0 and SPI1 modules.

Programmable Real-Time Unit (PRU) Terminal Functions

Details terminal functions for the Programmable Real-Time Unit.

Boot

Details boot mode selection terminal functions.

Universal Asynchronous Receiver/Transmitters (UART0, UART1, UART2) Terminal Functions

Details terminal functions for UART0, UART1, and UART2.

Inter-Integrated Circuit Modules(I2C0, I2C1) Terminal Functions

Details terminal functions for I2C0 and I2C1 modules.

Multichannel Audio Serial Ports (McASP) Terminal Functions

Details terminal functions for McASP modules.

Multichannel Buffered Serial Ports (McBSP) Terminal Functions

Details terminal functions for McBSP modules.

Universal Serial Bus Modules (USB0, USB1) Terminal Functions

Details terminal functions for USB0 and USB1 modules.

Ethernet Media Access Controller (EMAC) Terminal Functions

Details terminal functions for the EMAC module.

Multimedia Card/Secure Digital (MMC/SD) Terminal Functions

Details terminal functions for MMC/SD card interfaces.

Liquid Crystal Display Controller(LCD) Terminal Functions

Details terminal functions for the LCD controller.

Serial ATA Controller (SATA) Terminal Functions

Details terminal functions for the SATA controller.

Universal Host-Port Interface (UHPI) Terminal Functions

Details terminal functions for the UHPI interface.

Universal Parallel Port (uPP) Terminal Functions

Details terminal functions for the Universal Parallel Port.

Video Port Interface (VPIF) Terminal Functions

Details terminal functions for the Video Port Interface.

Supply and Ground Terminal Functions

Details terminal functions for supply and ground pins.

Device Configuration

Boot Modes

Describes the various boot modes supported by the internal DSP ROM bootloader.

Pullup/Pulldown Resistors

Specifications

Absolute Maximum Ratings Over Operating Junction Temperature Range

Specifies the absolute maximum ratings for voltage and temperature.

Handling Ratings

Details handling precautions, including ESD voltage ratings.

Recommended Operating Conditions

Specifies recommended operating conditions for supply voltage and junction temperature.

Electrical Characteristics Over Recommended Ranges of Supply Voltage and Operating Junction Temperature

Details electrical characteristics over recommended operating ranges.

Power Supplies

Power-On Sequence

Describes the required order for powering on the device's various supplies.

Reset

Power-On Reset (POR)

Explains the Power-On Reset behavior and its effects on device logic and pins.

Reset Electrical Data Timings

Crystal Oscillator or External Clock Input

Clock PLLs

Enhanced Direct Memory Access Controller (EDMA3)

EDMA3 Peripheral Register Descriptions

Describes the EDMA3 Channel Controller and Transfer Controller registers.

Interrupts

DSP Interrupts

Details the C674x DSP interrupt controller, prioritized interrupts, and registers.

Power and Sleep Controller (PSC)

Memory Protection Units

MPU1 Configuration Registers

MPU2 Configuration Registers

MMC / SD / SDIO (MMCSD0, MMCSD1)

MMCSD Peripheral Register Description(s)

MMC/SD Electrical Data/Timing

Serial ATA Controller (SATA)

SATA Register Descriptions

Multichannel Audio Serial Port (McASP)

McASP Peripheral Registers Description(s)

McASP Electrical Data/Timing

Multichannel Buffered Serial Port (McBSP)

McBSP Peripheral Register Description(s)

McBSP Electrical Data/Timing

Serial Peripheral Interface Ports (SPI0, SPI1)

SPI Peripheral Registers Description(s)

SPI Electrical Data/Timing

Inter-Integrated Circuit Serial Ports (I2C)

I2C Peripheral Registers Description(s)

Universal Asynchronous Receiver/Transmitter (UART)

UART Peripheral Registers Description(s)

UART Electrical Data/Timing

Universal Serial Bus OTG Controller (USB0) [USB2.0 OTG]

Universal Serial Bus OTG (USB0) Registers

USB0 [USB2.0] Electrical Data/Timing

Universal Serial Bus Host Controller (USB1) [USB1.1 OHCI]

USB Host Controller Registers

Ethernet Media Access Controller (EMAC)

EMAC Peripheral Register Description(s)

EMAC Electrical Data/Timing

LCD Controller (LCDC)

LCD Controller Registers

Host-Port Interface (UHPI)

HPI Peripheral Register Description(s)

HPI Electrical Data/Timing

Universal Parallel Port (uPP)

uPP Register Descriptions

uPP Electrical Data/Timing

Video Port Interface (VPIF)

VPIF Register Descriptions

VPIF Electrical Data/Timing

Enhanced Capture (eCAP) Peripheral

ECAPx Configuration Registers

Enhanced Pulse Width Modulator (eHRPWM) Timing

Real Time Clock (RTC)

Real-Time Clock Register Descriptions

General-Purpose Input/Output (GPIO)

GPIO Register Description(s)

Programmable Real-Time Unit Subsystem (PRUSS)

PRUSS Register Descriptions

Emulation Logic

JTAG Port Description

Electrostatic Discharge Caution