Speech Dialler Operators Manual
INS233 9
Acknowledgment Type
The Acknowledgment type can be programmed to one of the following options:
1 Acknowledge Only: When the message type is a voice message the person
receiving the call should press the number [8] key on their telephone to
acknowledge the call. Once the call has been acknowledged the Speech Dialler
will not attempt to dial that contact again. If the message type is a text message
the SMS service centre automatically acknowledges it. The unit will then contact
the next available person.
2 Remote Access: When the message type is a voice message the person
receiving the call should press the number [8] or [*] key on their telephone to
acknowledge the call. If the [*] key is used the contact will enter the remote
access menu of the Speech Dialler which allows them to listen-in etc, see page
28 for more details.
3 Rem & Stop Calls: When the message type is a voice message the person
receiving the call should press the number [8] or [*] key on their telephone to
acknowledge the call. If the [*] key is used the contact will enter the remote
access menu. Once the call has been acknowledged by the contact the Speech
Dialler will hang-up and return to its normal standby mode. If the message type is
a text message the SMS service centre automatically acknowledges it and the
Speech Dialler returns to its normal standby mode.
4 Stop Calls: When the message type is a voice message the person receiving the
call should press the number [8] key on their telephone to acknowledge the call.
Once the call has been acknowledged by the contact the unit will hang-up and
return to its normal standby mode. If the message type is a text message the
SMS service centre automatically acknowledges it and the unit returns to its
normal standby mode.
Dial Attempts
The dial attempts option controls how many times the Speech Dialler will attempt to
relay the message to the contact. The number attempts can be programmed from 1 to
9.
! To Add/Change Contact Details:
1
From the main menu press ) or + to
select the Contact Details menu:
()*'+,'-./.0+12'
3,4+50+'%.+56/7'
2
Press ! to select:
3,4+50+'K'L5G.'M'
'
To Next Page
Loading...
Need help?
General
