Texecom Speech Dialler - Exiting the Programming Menu

Speech Dialler Operators Manual
24 INS233
3
Use ) or press / to select the
Miscellaneous menu:
()*'+,'-./.0+12'
9670.//54.,A7
4
Press ! to select. The top line of the display
will show the description for the option the
cursor (M) is pointing at. The bottom line shows
which options are enabled:
c';C6::.C7'
MH'$'^';'H'H'H'
5
Press + - 1 to enable/disable options,
e.g., press
/ to enable Auto Record:
$A+,'".0,C='
'H'$'^';M"'H'H'
6
Press ! to accept and exit this menu.
Exit Programming Menu
When you exit the programming menu you can exit and leave the Speech Dialler in
one of two modes:
Ready Mode
This mode is the normal operating mode of the Speech Dialler.
Disabled Mode
This mode disables the Speech Dialler’s trigger inputs and therefore the unit will not
call out in the event of an alarm.
! To Exit the Programming Menu:
1
From the main menu press ) or 3 to
select the EXIT Programming Menu. Or keep
pressing the
* key:
()*'+,'#DE;12'
FC,:C5GG64:'9.4A'
2
Press ! to select:
)Z".5=V'G,=.'
<Z%675a/.='G,=.
3
Press ! to exit to the Ready mode or # to
exit to the Disabled mode, e.g., press
! to
exit to the Ready mode:
!!!!!"#$%&!!!!!!'
'
4
The selected operating mode is alternatively
shown on the top and bottom line of the
display:
'
!!!!!"#$%&!!!!!!'