Need help?Do you have a question about the Theben KNX Series and is the answer not in the manual?
General| Communication Protocol | KNX |
|---|---|
| Ambient Temperature | -5°C to +45°C |
| Storage Temperature | -25°C to +70°C |
| Protection Class | IP20 |
| Relative Humidity | 5% to 95%, non-condensing |
| Operating Voltage | 24 V DC (via KNX bus) |
Detailed list of communication objects for the RTC function.
Details on communication objects specific to the room temperature controller.
Explanation of communication objects related to device diagnosis and alarms.
Overview of all parameter pages and their purpose for device configuration.
Settings for control type, rotary control function, and manual offset.
Settings for operating modes and their determination via sensors.
Parameters for heating control, including type, stages, and hysteresis.
Definition of base set points, valid ranges, and reductions for heating.
Parameters for cooling control, including type, stages, and hysteresis.
Definition of dead zones, standby, night, and heat protection set points for cooling.
Settings for adjusting set points based on outdoor temperature and limits.
Detailed configuration for switch objects on external inputs.
Detailed configuration for button objects on external inputs.
Detailed configuration for dimming functions.
Wiring diagrams and specifications for connecting external inputs.
How to define the current operating mode based on input signals.
How the current set point is calculated in heating mode.
How the current set point is calculated in cooling mode.
Definitions of base and current set points and their relationship.
To Next Page