Page | 6
1.2. Type TR top3 (35 mm) overview:
TR 610 top3 TR 612 top3
Number of memory locations
Switching default for the time switch comprised of the time (hours + minutes), the weekday
(Monday to Sunday) and the channel status (ON or OFF).
As from the programmed time and weekday the channel status is valid up until the next
switching time.
In the time period limited switching default for the time switch comprised of the time (hours
+ minutes), the weekday (Monday to Sunday), the channel status (ON or OFF) and the
duration (minutes + seconds).
As from the time and weekday the channel status is valid for the set time period.
A continuously repetitive sequence of channel ON and channel OFF. Start time and end
can be adjusted (hour + minute + weekday). The time period for ON (pulse duration) and
for OFF (pause duration) can also be set (hours + minutes + seconds).
Generic term for switching time, pulse, cycle