Page | 87
If the transfer was faulty, you can try again or close the dialogue box.
If the transfer was successful, the view changes to edit mode and shows the switching times.
Accessing the time switch directly
As well as transferring projects, it is also possible to send direct switch and data commands to the
device over Bluetooth.
Tap the "Direct access" icon to search for all devices available over Bluetooth in the vicinity and display
them in a list
After selecting the required device, the connection is established and the current system status of the
device is shown.
If the transfer was faulty, you can try again or close the dialogue box.
To Next Page
Loading...
