Thermal Dynamics 38 Cutmaster Service Manual

APPENDIX 7: PUBLICATION HISTORY
Cover Date Rev Details
1/31/2003 - - Manual Released.
4/8/2003 - - Revised; updated trouble-shooting per Tech Service, updated system schematic to Rev. AC,
added CE input filter.
7/3/2003 - - Updated power cord per ECO 100487, added pin-out diagram for torch connector.
4/12/2006 AA Added input power cords & strain reliefs, per ECOs 101877 & B049.
9/29/06 AA.01 Added patent information at the end of section 6 per ECO-B193. Updated rear cover
adding contact information. Applied next rev level fomat.

Thermal Dynamics 38 Cutmaster Specifications

General

Brand	Thermal Dynamics
Model	38 Cutmaster
Category	Welding System
Language	English