Thermal Dynamics CutMaster 58 - 6.05 Options and Accessories

CUTMASTER 58
PARTS LIST Manual 0-5544
6-2
NOTE!
*9-0115 regulator, If the serial number of the power supply is prior to #05078755 then kit number 9-0201 will be needed to
replace not only the regulator (9-0115) but the logic PCB as well. Another way to tell if the kit is needed is to see if the regulator
has a small diameter tube coming out of the bottom tting. If there is a transducer and wire harness instead of the tube, the kit
is not needed
6.05 Options and Accessories
Qty Description Catalog #
1 Single - Stage Filter Kit (includes Filter & Hose) 7-7507
1 Replacement Filter Body 9-7740
1 Replacement Filter Hose (not shown) 9-7742
2 Replacement Filter Element 9-7741
1 Two - Stage Filter Kit (includes Hose & Mounting Screws) 9-9387
1 Two - Stage Air Filter Assembly 9-7527
1 First Stage Cartridge 9-1021
1 Second Stage Cartridge 9-1022
1 Extended Work Cable (50 ft / 15.2 m) with Clamp 9-8529
1 Multi - Purpose Cart 7-8888
1 Automation Interface Kit 9-8311
1 25' / 7.6 m CNC Cable for Automation Interface Kit 9-1008
1 35' / 10.7 m CNC Cable for Automation Interface Kit 9-1010
1 50' /15.2 m CNC Cable for Automation Interface Kit 9-1011
1 Nylon Dust Cover 9-7071
Art # A-02476
Filter
Element
(Cat. No. 9-7741)
Housing
Cover
Barbed
Fitting
Spring
Assemb
led Filter
O-ring
(Cat.
No. 9-7743)
First & Second
Stage
Cartridges
(as marked)
Art # A-02942
Optional Single - Stage Filter Kit Optional Two - Stage Filter Kit