OPERATION 16 Manual 0-2577
Material Thickness Cut Speed (IPM) Amps Gas / Pressure Stand Off
ALUMINUM 24 gauge 250 20 Air / 50 psi Drag - 1/8"
22 gauge 200 20 Air / 50 psi Drag - 1/8"
1/16" (1.6 mm) 150 20 Air / 50 psi Drag - 1/8"
3/32" (2.4 mm) 25 20 Air / 50 psi Drag - 1/8"
1/8" (3.2 mm) 10 20 Air / 50 psi Drag - 1/8"
Tables 3-D Recommended Cutting Speeds (continued)
To Next Page
Loading...
