Software Architecture
10
Smart-Vue Administrator Manual Thermo Fisher Scientific
Listening Interval on TCP port Sets frequency at which the
SVuServer service reads
emul_<receiver_name>. Speeds
under 100 ms require a very fast
server.
Send back to client interval Sets frequency at which SVuServer
sends information back to Smart-Vue
Client. Speeds under 100 ms require
a very fast network.
Remove receiver Removes the selected receiver from the
application. The application will not
remove the receiver here unless you
first remove all associated end-point
modules using Smart-Vue Client.
Rename receiver Changes the name of the selected receiver.
This can be done even when
end-points have been previously
configured. Names may be
composed of up to 8 alpha-numeric
characters, including the underscore
character ( _ ). Do not use spaces.
SmartService applications
work as a Service Process If this checkbox is checked, the
SmartService applications operate
normally as Windows services. You
would only uncheck this box to trace
To Next Page
Loading...
Need help?
General