Thermo Scientific Smart-Vue - End-Point Module Interface; LCD and Pushbutton

Preventive Maintenance Guidelines
Thermo Fisher Scientific Smart-Vue Administrator Manual 35
2.1.4 End-Point module
interface
2.1.4.1 LCD and pushbutton Smart-Vue end-point modules offer a simple interface comprised of an
LCD screen and a pushbutton, as described here (for normal operation):
• Battery information is updated once a day
• Signal strength information is updated each time data is transmitted
wirelessly
• Values are updated upon each measurement
• The end-point module’s name is updated once a day or following
changes made to Sensor Settings in Smart-Vue Client (double-click
on sensor name ==> Settings tab ==> Sensor state)