Preventive Maintenance Guidelines
28
Smart-Vue Administrator Manual Thermo Fisher Scientific
Receiver placement
Receivers should not be installed on the same side of the wall as the
module. Near a wall, the radio waves are likely to be subject to
interfering dispersions or reflections. Consequently, position the receiver
on the opposite or connecting wall.
Distance between receiver and sources of interference
The distance between receivers and other transmitters (e.g. GSM / DECT
/ wireless LAN) or high-frequency sources of interference (computers,
audio and video equipment) should be at least 40cm.
To Next Page
Loading...
Need help?
General