Preventive Maintenance Guidelines
Thermo Fisher Scientific Smart-Vue Administrator Manual 43
Construction and visual aspect The LS 17500 cell is constructed
using concentric electrode “bobbin”
technology. Cell is hermetically
sealed with a sturdy glass-to-metal
seal (≤ 10-7 atm.cc/sec under 1 atm.
He). When inspected by the naked
eye, the LS 17500 cell should not
show any trace of dents, swelling,
corrosion or electrolyte leakage.
Marking should be readable.
Storage Before use, the LS 17500 cell should be
stored in dry and cool conditions, at
a temperature preferably not
exceeding + 30°C. Storage at higher
temperature is possible but it may
later affect cell capacity and its
ability to exhibit proper start-up
voltage characteristics.
Battery safety tips
Note :
1. Do not remove the cells from their original packing before use.
2. Do not store the cells in bulk in order to avoid accidental short
circuiting.
3. Do not heat above 120°C or incinerate.
4. Do not disassemble.
5. Do not recharge.
6. Do not solder directly on the cell.
7. Do not mix new and used cells or cells from different origins.
To Next Page
Loading...
Need help?
General