Thermo 49i - Startup

Installation
Startup
2-8 Model 49i Primary Standard Instruction Manual Thermo Fisher Scientific
Startup Use the following procedure when starting the instrument.
1. Turn the power ON.
2. Allow 90 minutes for the instrument to stabilize.
3. Set instrument parameters such as operating ranges and averaging times
to appropriate settings. For more information about instrument
parameters, see the “Operation” chapter.
Table 2-3. 25-Pin Terminal Board Pin Descriptions
Pin Signal Description Pin Signal Description
1 IOut1 13 Analog_In1
2 GND_ISO 14 Analog_In2
3 IOut2 15 Analog_In3
4 GND_ISO 16 GNDD
5 IOut3 17 Analog_In4
6 GND_ISO 18 Analog_In5
7 IOut4 19 Analog_In6
8 GND_ISO 20 GNDD
9 IOut5 21 Analog_In7
10 GND_ISO 22 Analog_In8
11 IOut6 23 GNDD
12 GND_ISO 24 GNDD