Thermo 49i - Relay States

Operation
Diagnostics Menu
3-56 Model 49i Primary Standard Instruction Manual Thermo Fisher Scientific
Relay States The Relay States screen displays the state of the 10 digital outputs and
allows toggling of the state to either on (1) or off (0). The relays are restored
to their original states upon exiting this screen.
• In the Main Menu, choose Diagnostics > Relay States.
Test Analog Outputs The Test Analog Outputs menu contains a number of digital to analog
converter (DAC) calibration items. Channel choices include all analog
outputs, 6 voltage channels, and 6 current channels (if the I/O expansion
board option is installed).
• In the Main Menu, choose Diagnostics > Test Analog Outputs.
DIGITAL INPUTS:
>INPUT 1 1
INPUT 2 1
INPUT 3 1
INPUT 4 1
INPUT 5 1
INPUT 6 1
INPUT 7 1
ª
RANGE AVG DIAGS ALARM
RELAY STATE:
>OUTPUT 1 0
OUTPUT 2 0
OUTPUT 3 0
OUTPUT 4 1
OUTPUT 5 0
OUTPUT 6 0
OUTPUT 7 0
ª
RANGE AVG DIAGS ALARM
TEST ANALOG OUTPUTS:
>ALL
VOLTAGE CHANNEL 1
VOLTAGE CHANNEL 2
VOLTAGE CHANNEL 3
VOLTAGE CHANNEL 4
VOLTAGE CHANNEL 5
VOLTAGE CHANNEL 6
ª
RANGE AVG DIAGS ALARM