Manual NOVOS und thanos EVO
Thermokon Sensortechnik GmbH Seite 23
5.3 Data block “Lighting”
Parameter Description N3 N5 N7
Touch/
EVO
Min Max Default Access
Coil mapping
Status of lighting 1-8
Status Scenes 1-8
Coil states ON/OFF (chapter 7.1 & 7.2)
of lighting and scenes (bit-coded)
bit 0 - bit 7 = lighting 1-8
bit 8 - bit 15 = scenes 1-8
● ●
r / w
uint16_t
199
Depending on the configuration in
register 1416, the action of the user is
provided.
Details in register 1416.
The Light ON/OFF state is output in coils
0-7. See coil data block "Light" (chapter
7.1).
0..100 = Dimm_Value
110 = Button_No_Press
111 = Button_Short_Press_UP
112 = Button_Long_Press_UP
113 = Button_Short_Press_DOWN
114 = Button_Long_Press_DOWN
115 = Button_Pressed_UP
116 = Button_Pressed_DOWN
● ●
0 116
0
r / w
uint16_t
200
● ● 201
● ● 202
● ● 203
● ● 204
● ● 205
● ● 206
● ● 207
AUTO Mode
for Lighting 1-8
Summary of coils 32-39
If individual lighting circuits are to be
controlled temporarily exclusively by the
BMS, the buttons for setting individual
lighting circuits can be disabled.
All the buttons on the user interface are
greyed out.
Lighting 1-8 (binary coded)
bit 0 = Buttons Lighting 1
bit 1 = Buttons Lighting 2
…
bit 7 = Buttons Lighting 8
0 = AUTO-Mode OFF
1 = AUTO-Mode ON (Buttons locked)
● ● 0 255 0
r / w
uint16_t
208
The following register block describes the RGB(W) values of the colour picker (colour mixer) or the color temperature of the color temperature picker.
RYB(W) Value
or color temperature
(according to setting, Data
address 1416)
Red value 0..255
or color temperature 0..15.000 K
● 0 15000
210
● 0 255
211
● 0 255
212
● 0 255
213
RYB(W) Value
or color temperature
(according to setting, Data
address 1542)
Red value 0..255
or color temperature 0..15.000 K
● 0 15000
238
● 0 255
239
● 0 255
240
● 0 255
241