Manual NOVOS und thanos EVO
Thermokon Sensortechnik GmbH Seite 13
4.3 Main menu
NOVOS 7
NOVOS Touch / thanos EVO
NOVOS 7 Carousel
(main menu)
By turning the encoder, the NOVOS 7 switches to the
main menu (carousel). The menu is still operated by
the rotary/press encoder. All functions i.e. symbols
(except the settings menu) can be activated or
deactivated individually. All menu items are active
during initial installation.
NOVOS Touch / thanos EVO Menu bar
(Navigation
bar)
The menu bar is located at the bottom of the touch
display (equivalent to the carousel of the NOVOS 7).
The menu bar is a central element on the home
screen. With a swipe gesture, you can switch
between the menu pages in the menu bar. In the
menu bar, all menu items are displayed as buttons.
The activation of the ECO mode, switching of room
occupancy and the submenu for fan speed
adjustment are arranged in the Climate menu -
unlike the NOVOS 7. To activate or deactivate the
ECO mode and to trigger the room occupancy status,
simply touch the button.
Configuration data block „General“
▪ Display menu monitoring
▫ Data address 1122
0 = no
1 = yes
Configuration data block „Display“
▪ Display button standby
▫ Data address 1205
0 = no
1 = yes
Configuration data block „Climate“
▪ Display menu temperature
▫ Data address 1300
0 = no
1 = yes
▪ Display button ECO
▫ Data address 1305
0 = no
1 = yes
▪ Display room occupancy
▫ Data address 1306
0 = no
1 = yes
▪ Display fan control
▫ Data address 1308
0 = no
1 = yes
Configuration data block“Lighting“
▪ Display menu light
▫ Data address 1400
0 = no
1 = yes
Configuration data block „Shading“
▪ Display menu shading
▫ Data address 1600
0 = no
1 = yes
Configuration data block „Szenen“
▪ Display menu scenes
▫ Data address 1800
0 = no
1 = yes
To Next Page
Loading...
Need help?
General
