Thermokon NOVOS 7 User Manual

Manual NOVOS und thanos EVO
Seite 18 Thermokon Sensortechnik GmbH
4.4.1 Shading menu
NOVOS 7
NOVOS Touch/thanos EVO
Configuration data block „Shading“
▪
Number of shading groups
▫ Data address 1601
0-8
▪
Display of the shading groups
▫ Data address 1602
List view = 0
Representation in the room plan = 1
Display both= 2
▪
Selection of the shading icons
▫ Shading 1; Data address 1615
▫ Shading 2, Data address 1636
▫ Shading 3; Data address 1657
▫ Shading 4; Data address 1678
▫ Shading 5; Data address 1699
▫ Shading 6; Data address 1720
▫ Shading 7; Data address 1741
▫ Shading 8; Data address 1762
0 = Shutter
1 = Shutter group
2 = Roller shutter
3 = Roller shutter group
4 = Curtain
5 = Curtain group
Shading groups
Just like the lighting groups, up to eight shading
circuits can be controlled. The shading menu is
available in the NOVOS 7, NOVOS Touch as well as
thanos EVO.
Depending on the application, shutters or blinds can
be configured with or without angle adjustment.
The user interface concept is identical to the lighting
circuits (see chapter 4.3.2).
User key lock
(AUTO mode, Data address 316 | Coil 40-47)
With NOVOS 7, Touch and Thanos EVO, the keys of
the individual shading groups can be blocked by the
BMS. All locked keys of the respective shading group
are greyed out in the entire user interface and
cannot be operated by the user. In active Auto
mode, the locked shading groups are switched and
dimmed exclusively by the BMS via Modbus.

Thermokon NOVOS 7 Specifications

General

Brand	Thermokon
Model	NOVOS 7
Category	Thermostat
Language	English