THK TSC Series - Options

2. Installation
1.
Check products
2-5
TSC
1-2
Options
1-2-1
D-STEP
Driver controller
TSC side (CN3)
PC side
USB
A setup tool. This can be downloaded from our website free of charge.
* Registration with the technical support is required to download.
URL: https://tech.thk.com/
In addition, a PC communication cable is required to use D-STEP.
For details, see the separate D-STEP Instruction Manual.
1-2-2
TDO
The digital operator for driver controller TSC, TLC and THC.
Model: TDO-N
For details, see the separate TDO Instruction Manual.
1-2-3
I/O cable
A cable with a soldered I/O connector for external input and output signals (CN1).
Model: CBL-TSC-IO
-□□
(03: 3 m, 05: 5 m, 10: 10 m)
For details, see (
→
P.3-14) (
→
P.3-25)
(Cable length)
A PC communication cable for use with D-STEP.
Model: CBL-COM-03
For details, see the separate D-STEP Instruction Manual.
1-2-4
PC communication cable
□□
Driver controller side Host controller side
Driver controller side
PC side