THK TSC Series - Driver Controller TSC; Specifications and Dimensional Drawing

8. Technical Materials
1.
Driver controller TSC
8-2
TSC
1-1
Specifications and dimensional drawing
* Depending on function modes.
R2.5
∅5
5.6
32
77.6
182.6
192.2
2
CN
4
CN
CN
3
1
I D
MANU
CN
AUTO
BRK
OFF
8
5
0
7
B
6
4
C
A
D
F
9
E
3
2
1
Specifications
Dimensions
CN
5
PWR
OFF
SV/
BRK
MOT
ALM
24 VDC ± 10% (max. 2.5 A)Input power supply Basic specification
Control
Control shaft count 1 shaft
Stepper motor (□ 28 mm, □ 35 mm, and □ 42 mm)Motor type
Feedback control (semi-closed loop)Control method
IncrementalPosition detection method
Trapezoid acceleration
Acceleration/
Deceleration method
Program
Function mode
Position 64 type
External unit input
instruction type
Position 256 type Position 512 type Solenoid mode 1 Solenoid mode 2
Step data count 64 points 7 points 3 points512 points 256 points64 points
PC setup tool D-STEP or digital operator TDOProgram edit tool
Input/output
Dedicated
input/output
16 points (Start, Zero return, Pause, Reset, Servo ON, Step No. specification, etc.)
*
Input point count
16 points (Zero return completed, In position, Servo ready, Alarm, Emergency stop status, etc.)
*
Output point count
24 VDC±10% (This should be prepared by yourself)
External power supply
for input/output
Communication
Serial
communication
PC setup tool D-STEP or digital operator TDO
RS-485
Connected device
Communication
method
Port count Mini DIN x 1
Usage
conditions
0 to 40°C (no freezing)/-20 to 85°C (no freezing)
Operating temperature
/Storage temperature
Service and Storage humidity 90% RH or less (no condensation)
Indoor (without exposure to direct sunlight) with no corrosive gas, flammable gas, oil mist or dust particlesAmbient condition
General
specifications
Overload, Overvoltage, Position deviation too large, and Software limit over error, etc.Protective function
Accessories
Power connector x 1
I/O connector x 1
Options
(Separately-sold)
Digital operator TDO (Cable length 5 m)
I/O cables 3m, 5m, 7m and 10m
PC communication cable (Mini DIN ⇔ USB)
32 mm（W） × 192.2 mm（H） × 77.6 mm（D）External dimensions
Mass 300 g or less