THK TSC Series - Connect to PC; Connect to TDO

3. Wiring
1.
How to wire
3-11
TSC
1-3-1
How to connect
1.
Insert the cable to the CN3 of TSC,
aligning the arrow of the plug with the
one of TSC.
If you insert the plug while rotating it, the
connection pins may be damaged.
1-3
Connect to PC
• Connect with the separately-sold communication cable (CBL-COM-03.) (
→
P. 2-5)
• If the PC has only the USB port instead of the RS-485 port, use the provided conversion cable.
Operations with other than this conversion cable cannot be guaranteed. (
→
P. 2-5)
1-4
Connect to TDO
1-4-1
How to connect
1.
Insert the cable to the CN3 of TSC,
aligning the arrow of the plug with the
one of TSC.
If you insert the plug while rotating it, the
connection pins may be damaged.