THK TSC Series - Maintenance and Inspection; Standard of Durability of Consumables in the Driver Controller TSC

7. Maintenance and
Warranty
7-2
TSC
WARNING
1.
Maintenance and inspection
⿟
Before conducting maintenance and inspection works, be sure to stop the machine and
shut off the power supply. Take security measures like locking, etc. to ensure any unau-
thorized person cannot turn the power ON.
Otherwise, injury caused by unexpected behavior may occur.
Obligatory
1-1
Standard of durability of consumables in the driver controller TSC
1-1-1
Standard of durability of consumables
⿟
Parts listed in the table below are also subject to aged deterioration, so use the following only for
reference.
Consumables Location Durability
Contact relay Power supply circuit (power ON/OFF) 100,000 cycles
Contact relay TDO connection circuit (with TDO connected) 100,000 cycles
• We do not provide repair service for the driver controller TSC out of the warranty period. Please prepare a
spare driver controller TSC in advance or purchase new one.
Important