THK TSC Series - Page 85

6-1
6. Troubleshooting
TSC
This section describes the
alarm code and its output
procedures.
This section describes
causes and handling of
alarms.
About this chapter
This chapter describes the causes and counter measures when an alarm is displayed or other failure occurs on the
driver controller TSC.
1.
Alarm lists …………………… 6-2
1-1. Alarm lists …………………………………… 6-2
1-2. About the status of the servo when
an alarm sounds …………………………… 6-3
2.
Alarm code …………………… 6-4
2-1. Alarm code ………………………………… 6-4
3.
Causes and counter measures
of alarms ……………………… 6-5
3-1. Causes and counter measures of
alarms ………………………………………… 6-5
This section describes the
alarm list.