Thommen AD20 - 1.1.2.2.2 Identification;Name Plate

REVUE THOMMEN AG
CH-4437 Waldenburg
AD20 Standby Altimeter
Page 14 of 72
07-Sep-2009 Document No: AD-INSOP-800 Revision: 1.6
1.1.2.2.2 Identification/Name Plate
The Identification/Name plate is attached on the instrument case of AD20 Standby Altimeter. The
sample of Identification/Name plate of AD20 Standby Altimeter is shown below:
ETSO/TSO-Nameplate (sample)
REVUE THOMMEN AG
CH-4437 WALDENBURG
ALTIMETER
CERTIFIED ETSO/TSO-C10b WT 550 gm (1.2 lbs)
RTCA/DO-160D ENV.CAT. [F1]CBB[(TB1)(TR)]XWFDFSZZAZZ[YY]M[A3J33]XXA
RTCA/DO-178B LEVEL A
CONFIG ID
PART/TYPE NO AD20.32.55F.05.1.AP - 85XX
SER NO xxxxxxx
PWR SUPPLY 28 VDC
RANGE -1'000 … 55'000 FEET LIGHTING SUPPLY 5 VDC
MFR DATE month / year
SWISS MADE PHONE +41 61 965 22 22 info@thommen.aero
Version/MOD Label (sample)
REVUE THOMMEN AG
CH-4437 WALDENBURG
HW Version 1.XX
SW Version 6.XX
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
MOD
A B C D E F G H I J K L M N P R S
SWISS MADE PHONE +41 61 965 22 22 info@thommen.aero
NOTE: The configuration ID code allows identifying the individual configuration of the instrument.
Instruments with the same config. ID codes are identical.