THOMSON TR-069 - Page 105

E-DOC-CTC-20071119-0003 v1.0
99
6| Service Provisioning
 Configuring egress VLAN tagging: the SetParameterValues RPC (message 21 in preceding illustration)
contains following name-value pairs in its ParameterList argument:
Name Value
InternetGatewayDevice.Layer2Bridging.Marking.1.MarkingBridge-
Reference
2 (= BridgeKey)
InternetGatewayDevice.Layer2Bridging.Marking.1.MarkingInterfac
e
10001 (=
AvailableInterfaceKey)
InternetGatewayDevice.Layer2Bridging.Marking.1.VLANIDUntag 0
The parameters MarkingBridgeReference and MarkingInterface are mandatory. This means
that the parameters must be set before the Marking object is internally created.