THOMSON TR-069 - CWMP Daemon Towards the ACS

E-DOC-CTC-20071119-0003 v1.0
24
2| Configuring CWM
P on the Thomson Gatew
ay
2.2.3 CWMP Daemon towards the ACS
Displaying configuration information
To obtain an overview of the CWMP daemon configuration towards the ACS, execute following command:
The parameters and their default values are displayed as follows:
Parameter description
To modify the configuration of the CWMP daemon towards the ACS, execute the command
:cwmp server config and specify one or more of the following optional parameters:
 Url: this parameter specifies the HTTP URL of the ACS.
 Username: this parameter defines the username for authentication of the Thomson Gateway at the ACS.
The ACS default username is <OUI> - <serial number>. This can be achieved using CLI environment
variable concatenation. To retrieve this information, execute the following commands:
 Password: this parameter defines the password for authentication of the Thomson Gateway at the ACS.
=>:cwmp server config
ACS url : http://acs-server.com
ACS username : 000E50-CP0452JT03Y
ACS password : ********
=>:env get var=_OUI
000E50
=>:env get var=_PROD_SERIAL_NBR
CP0452JT03Y