THOMSON TR-069 - Configuring TLS

E-DOC-CTC-20071119-0003 v1.0
14
2| Configuring CWM
P on the Thomson Gatew
ay
2.1 Configuring TLS
Introduction
The use of TLS/SSL is optional.
Whether or not to use TLS/SSL is derived form the ACS URL scheme or file URL scheme:
 If the URL scheme starts with https://, TLS/SSL is used.
 If the URL scheme starts with http://, TLS/SSL is not used.
To display the transport protocol and port used by the HTTP and HTTPS services, execute following
commands:
Overview
This section is structured as follows:
=>:service system list name=HTTP
Idx Name Protocol SrcPort DstPort Group State
---------------------------------------------------------------------------------
1 HTTP tcp 80 enabled
=>:service system list name=HTTPs
Idx Name Protocol SrcPort DstPort Group State
---------------------------------------------------------------------------------
1 HTTPs tcp 443 enabled
Topic Page
“2.1.1 TLS Client” 15
“2.1.2 TLS Certificates” 16