THOMSON TR-069 - Retrieval of the Device Log

E-DOC-CTC-20071119-0003 v1.0
56
4| Monitoring and Di
agnostics
4.4 Retrieval of the Device Log
Introduction
The IGD data model contains the DeviceLog parameter, which is located within the object
“InternetGatewayDevice.DeviceInfo.”. When the ACS asks for the device log of the CPE, it receives the
“upper” 32 Kbyte of the syslog message buffer contents.
Message flow
Following illustration shows a possible message flow for the retrieval of the device log:
Example: parameter values
To retrieve the device log, the GetParameterValues RPC (message 1 in preceding illustration) contains
following ParameterNames argument:
ACSCPE
Transaction session
Obtain the Device Log
1) GetParameterValues
2) GetParameterValuesResponse
...
...
Entry Value
1 InternetGatewayDevice.DeviceInfo.DeviceLog