THOMSON TR-069 - NAT Application List Configuration

E-DOC-CTC-20071119-0003 v1.0
87
6| Service Provisioning
6.8 NAT Application List
NATApplicationList data model
The IGD data model on the Thomson Gateway contains the object
“InternetGatewayDevice.Services.X_000E50_NATApplicationList.”.
This object can be used to:
 Update the list of NAT applications. Each NAT application is defined by:
 A user-friendly name.
 The port(s) or port range(s) to map the port used on the WAN side to the port used on the LAN side.
 Assign a particular local network device to a NAT application.
The Thomson Gateway supports following proprietary NAT application list data model:
Name Type Actions
InternetGatewayDevice.Services.X_000E50_NATApplicationList. Object
ApplicationNumberOfEntries Parameter Read
Application. Object Add/Delete
Name Parameter Read/Write
HostIPAddress Parameter Read/Write
RuleNumberOfEntries Parameter Read
Rule. Object Add/Delete
Protocol Parameter Read/Write
InternalPort Parameter Read/Write
ExternalPort Parameter Read/Write
ExternalPort-
RangeEnd
Parameter Read/Write