THOMSON TR-069 - Time

E-DOC-CTC-20071119-0003 v1.0
76
6| Service Provisionin
g
6.3 Time
Time data model
The IGD data model on the Thomson Gateway contains the object “InternetGatewayDevice.Time.”.
This object can be used to:
 Configure the NTP server IP addresses.
 Enable the NTP service.
Vendor specific parameters
The Time data model on the Thomson Gateway contains following vendor specific parameters:
 X_000E50_WeekDay: the day of the week (Monday, Tuesday,...).
 X_000E50_Enable: used to enable or disable the NTP service.
Message flow
Following illustration shows a possible message flow for NTP service provisioning:
Example: parameter values
For example, following parameter values can be used:
 the SetParameterValues RPC (message 1 in preceding illustration) contains following name-value pairs
in its ParameterList argument:
ACSCPE
Transaction session
...
2) Apply changes
Configure the Time service
1) SetParameterValues
3) SetParameterValuesResponse
...
Name Value
InternetGatewayDevice.Time.NTPServer1 <hostname> or <ipaddress>
InternetGatewayDevice.Time.X_000E50_Enable 1