E-DOC-CTC-20071119-0003 v1.0
60
5| WAN Connections
Overview
Following steps must be performed to create a WAN connection:
1 Create and configure a WAN connection device. See “5.1 WAN Connection Device” on page 61.
2 Create and configure a WAN PPP or IP connection. See “5.2 WAN PPP or IP Connection” on page 62.
3 Obtain connection information. See “5.3 Connection Information” on page 65.
4 Create and configure a forwarding entry. See “5.4 Forwarding Entries” on page 66.
To Next Page
Loading...
