OPERATING MANUAL TW63 TRANSPORT AND STORAGE
ThyssenKrupp Aufzugswerke GmbH
Check on acceptance by the recipient
The delivered parts and their packaging are to be checked for completeness,
damage or other conspicuous features.
Reporting and documenting damage in transit
On delivery, make sure that no damage in transit has occurred.
Any damage that is determined is to be documented immediately (sketch,
photo, description of the damage).
Forward the corresponding documents without delay to THYSSENKRUPP
AUFZUGSWERKE GmbH.
Unpacking
Dispose of packaging materials in an environmentally compatible manner or
reuse them.
Specific transport equipment and shipping braces remain with the customer.
Int
ermediate storage
If the assembly is not installed immediately after delivery, it must be stored
carefully in a protected location. On covering, attention is to be paid to
ensuring that no condensation can form and that no moisture can penetrate.
The assembly must not be stored outdoors. Bare parts have no long-term
preservation.
Ambient conditions
The environment at the final location (moisture, temperature) must
correspond to normal indoor climate conditions for machine and pulley
rooms.
(According to EN 81, between +5°C and +40°C)
To Next Page
Loading...
Need help?
General
