Tigo EI - Mounting

The EI Inverter – Mounting
EI Residential Solar Solution US Installation Manual | www.tigoenergy.com | Help Center 9
Battery
Continuous
Operating normally
Flashing 1s on/3s off
Low charge state
Flashing .5s on/.5s off
Fault detected
Off
Disconnected
Fault
Continuous with audible alarm
Arc fault
Continuous
Fault
Flashing 1s on/1s off
Warning
Off
No faults detected
Mounting
To mount the inverter:
1. Choose a location on a plumb wall with adequate clearance, free from direct sun and
precipitation.
2. Affix the inverter top bracket using screws appropriate for the wall surface.