The EI Battery – Place and Prepare
EI Residential Solar Solution US Installation Manual | www.tigoenergy.com | Help Center 36
Place and Prepare
To place and prepare a battery:
1. Choose a location with:
• A level floor.
• A plumb wall.
• Minimum 914mm (3ft) clearance side-to-side and top.
• No direct sun or precipitation.
2. If mounting against a wall, affix the two side tabs.
3. Remove the front panel screws and two locking clips behind the base cover and open
the enclosure.
4. Detach the display and ground cables.
To Next Page
Loading...
