TIPTEL 540 SD - Sample Programming for Timer

Timer
59
Use the two lower selection buttons
and the control buttons (left/right)
t
o find what needs to be changed in
t
he selected time.
The symbols have the following mean-
ings:
 = Answering mode
 = OGM
 = Message transfer
 = Call forwarding
Make the desired settings using the
control buttons (up or down).
A dash means that the previous status is
continued.
To delete a switching time press the
selection button next to the delete
symbol.
The empty entry field is displayed again.
To delete the timer press the selec-
t
ion button next to the delete sym-
bol for 2 seconds.
All switching times are deleted.
2s
To stop entering additional switch-
ing times press stop.
The settings are confirmed.
To stop the entry press stop several
t
imes.
The initial state is again displayed.
Use the two lower selection buttons
and the control buttons (left/right)
t
o find what needs to be changed in
t
he selected time.
The symbols have the following mean-
ings:
 = Answering mode
 = OGM
 = Message transfer
 = Call forwarding
Sample programming for timer
You want your tiptel 540 SD to switch on OGM 1 on Mondays to Fridays at 17.00
and switch off at 08.00. When the office closes on Friday and over the weekend the
answering machine should use OGM 2 throughout. This requires 3 switching times.