Settings
85
When entering digits press the se-
lection button next to the desired
line.
The entry location flashes.
Change the settings using the con-
rol buttons (up/down).
The display counts up or down.
For settings with several digits
move the entry location to the re-
quired location using the control
buttons (left/right).
The selected entry location flashes.
To end digit entry press the selec-
ion button next to the desired line
again.
The entry location stops flashing.
To stop the entry press stop several
imes.
The initial state is again displayed.
Adjusting the volume
You can set the volume when the device is in the initial state.
Set the volume using the control
buttons (left/right).
The volume bar shows the current set-
To Next Page
Loading...
